Announcements
[hsas-shortcode speed="30" direction="left" gap="120"]

Tech Notes

Filter by Topic
  • AES67
  • Analog IFB
  • Analog Intercom
  • Call Signals
  • Dante
  • Dante Clocking
  • Firmware Updates
  • Gooseneck Microphone
  • Intercom Audio Engine
  • Live Sports Production
  • Live-Link
  • Model 208
  • Model 348
  • Model 373A
  • Model 380
  • Model 391
  • Model 400
  • Model 412
  • Model 48D
  • Model 5190
  • Model 5401
  • Model 5401A
  • Model 5402
  • Model 5421
  • Model 5422
  • Model 5422A
  • Model 76
  • Model 76B
  • Models 214/215/216
  • New Release
  • Party-Line
  • Performance
  • Recommendations
  • Repair
  • ST 2110
  • STcontroller
  • StudioComm
  • Testing & Troubleshooting


28-Jan-2022 Dante Intercom Audio Engine Model 373A Model 5422A Performance

Creating a Basic 2-Channel Party Line Setup

Using the Model 5422A Dante Intercom Audio Engine and four 370A Intercom Beltpacks one can route a simple two channel party line setup in Dante Controller. Before any routing can be completed a few necessary pieces of software must be installed. The most important is Dante Controller which is free to download off of the Audinate website. STController is available on our website and any internet browser (Chrome, Edge,

Read Full Tech Note
16-Sep-2021 Dante Intercom Audio Engine Model 5422A Performance

Creating a Party-Line of more than 32 Channels

A Model 5422A Dante Intercom Audio Engine has a maximum group size of 32 channels. (In this case, the one group would be using all 32 channels of an audio engine.) So, in theory, a 32-channel group configured for the Party-Line operating mode would allow a maximum of 32 users to be part of that party-line (PL) circuit or channel. In the vast majority of applications that should be sufficient; having anything close to 32 users on the same PL would be an exception.

Read Full Tech Note
Skip to content
Menu