Announcements
[hsas-shortcode speed="30" direction="left" gap="120"]

Tech Notes

Filter by Topic
  • AES67
  • Analog IFB
  • Analog Intercom
  • Call Signals
  • Dante
  • Dante Clocking
  • Firmware Updates
  • Gooseneck Microphone
  • Intercom Audio Engine
  • Live Sports Production
  • Live-Link
  • Model 208
  • Model 348
  • Model 373A
  • Model 380
  • Model 391
  • Model 400
  • Model 412
  • Model 48D
  • Model 5190
  • Model 5401
  • Model 5401A
  • Model 5402
  • Model 5421
  • Model 5422
  • Model 5422A
  • Model 76
  • Model 76B
  • Models 214/215/216
  • New Release
  • Party-Line
  • Performance
  • Recommendations
  • Repair
  • ST 2110
  • STcontroller
  • StudioComm
  • Testing & Troubleshooting


14-Nov-2022 AES67 Model 5401A Model 5402 ST 2110

Supporting PTP v2 (AES67 and ST 2110) with the Model 5401A and the Model 5402

The Model 5401A Dante Leader Clock and the Model 5402 Dante Leader Clock with GNSS Synchronization were primarily designed for use in applications that utilize devices running “native” Dante. To support the timing needs of these devices Precision Time Protocol Version 1 (IEEE-1588-2002 or “PTP v1”) was implemented. The units’ PTP v1 implementation functions very well, including in redundant Dante applications. (Independent Ethernet networks connected to the Primary and Secondary Ethernet ports on the back panel of the Model 5401A and Model 5402 units.) Even in large installations with literally hundreds of Dante devices,

Read Full Tech Note
14-Jun-2022 AES67 Dante ST 2110

DSCP Tag Values

Dante® audio-over-Ethernet networking technology can support the requirements of the AES67 and SMPTE® ST 2110 technical standards. Studio Technologies offers a number of Dante-enabled products, all of which are capable of having their AES67 and/or ST 2110 capability enabled. This is performed using the Dante Controller software application.

For compatibility with a number important AES67 and ST 2110 technical parameters, Dante was required to implement several DSCP (Differentiated Services Code Point or DiffServ) tag values.

Read Full Tech Note
13-Sep-2018 AES67 Model 5401 ST 2110

Supporting PTP v2 (AES67 and ST 2110) with the Model 5401

Updated 21-Dec-2020

The Model 5401 Dante Master Clock was initially designed for use in applications that utilized devices running “native” Dante. To support the master timing needs of these devices Precision Time Protocol Version 1 (IEEE-1588-2002 or “PTP v1”) was implemented. The unit’s PTP v1 implementation functions very well, including in redundant Dante applications. (Independent Ethernet networks connected to the Primary and Secondary Ethernet ports on the back panel of the Model 5401.) Even in large installations with literally hundreds of Dante devices,

Read Full Tech Note
Skip to content
Menu