Model 33A Talent Amplifier

Product Information
Specifications
Related Products
Parts and Accessories

The Model 33A is unique in that a "mix" of IFB channels 1 and 2 can be created. Two level controls, along with a source select switch, allows camera and production personnel to hear IFB cues from either or both channels. This allows IFB signals intended for both technician and talent to be simultaneously monitored. By design, the Model 33A's level controls cannot be set to fully attenuate ("mute") the audio output. This helps to minimize the chance that users will accidentally miss important "cues" from directors or producers. While audio quality is not normally considered a factor in IFB or intercom systems, the Model 33A is built to "pro audio" standards. This helps to ensure that the best possible audio reproduction is provided.

The Model 33A is an update of the popular Model 33 Talent Amplifier. The Model 33A includes the addition of a 3.5 mm output jack, along with updated internal circuitry. In all ways the Model 33A meets or exceeds the performance of its predecessor.

The Model 33A is compatible with virtually every standard IFB and party-line intercom circuit, including those associated with equipment from RTS®, Clear-Com®, and Studio Technologies. This type of circuit typically uses a 3-pin XLR-type connector for interfacing with connected equipment. Electrically, XLR pin 1 serves as common for DC power and audio; pin 2 provides DC power and, in the case of a dual-channel circuit, DC power and channel 1 audio; pin 3 provides channel 2 audio for dual-channel systems, or channel 1 audio in single-channel systems.

Applications: directly compatible with talent amplifier output on Model 2A Central Controller; also compatible with standard single- and dual-channel IFB and party-line intercom circuits

Indicator Light: red LED indicates operation of internal power supply

Connectors:
Input: 3-pin female XLR
Loop Through: 3-pin male XLR
Output: ¼-inch and 3.5 mm 2-conductor jacks; sleeve common, tip "hot," ring not used

IFB/Intercom Input Wiring Scheme:
Pin 1: common for DC and audio
Pin 2: DC with channel 1 audio (dual-channel circuits) or DC only (single-channel circuits)
Pin 3: channel 1 audio (single-channel circuits) or channel 2 audio (dual-channel circuits)

Power Requirement: 18-35 Vdc, 15 mA quiescent, 40 mA maximum

Output:
Compatibility: intended for connection to mono (2-conductor) headsets or earpieces with nominal impedance of 150 ohms or greater
Type: voltage driver
Input/Output Gain: 28 dB, maximum
Maximum Output Voltage: 8 Vpp, 1 kHz, 150 ohm load
Frequency Response: 40 Hz-20 kHz, ±1 dB, 150 ohm load
Distortion (THD+N): 0.03%, 1 kHz, 150 ohm load, 0 dBu out

Dimensions (Overall):
3.25 inches wide (8.3 cm)
1.8 inches high (4.6 cm)
3.95 inches deep (10.0 cm)

Mounting: intended for portable applications; contains integral belt clip; optional mounting adapter kit allows Model 33A to be permanently mounted

Weight: 0.6 pounds (0.3 kg)

Specifications subject to change without notice.