Welcome to Studio Technologies, Inc. -- designers and manufacturers of video, audio, and fiber optic products for use worldwide in broadcast, studio, stadium, and corporate environments.

Live-Link™ Jr. "10X" Series: Supports Two Paths of 3G Digital Video, Two Mic/Line Inputs, Line/IFB Outputs, Party-Line and 4-Wire Intercom, Data and GPI/GPO


These versions interconnect using two strands of single-mode fiber-optic cable (not included) and provide support for the following:
Digital Video: one 3G/HD/SD-SDI send (camera to truck) and one 3G/HD/SD-SDI return (truck to camera)
Mic/Line Audio: two analog mic/line sends (camera to truck) with selectable gain and 48 V phantom power
Line/IFB: two analog line-level audio returns (truck to camera) and one 2-channel IFB output (camera) with 28 V beltpack power
Intercom: integrated 2-channel system; party-line (PL) with 28 V beltpack power and auto nulling on Camera End and Truck End, single-channel 4-wire interface on Truck End
Data/Remore Control: one RS-422 and one GPI/GPO
Powering: Camera End powered by 12 Vdc, battery or 10-50 Vdc via a hybrid fiber/copper connector; Truck End powered by 100-240 V, 50/60 Hz or 12 Vdc

The Camera End units are portable and include an enclosure with Anton/Bauer battery mount system (contact factory for V-Mount availability), handle, and rubber feet. Also included is a universal input (100-240 V, 50/60 Hz)/12 Vdc output power supply. Available with opticalCON DUO or ST fiber-optic connectors. Truck End units mount in one space (1U) of a standard 19-inch equipment rack. Includes ST fiber-optic connectors.

Go to Live-Link Jr. Data & Specs Page

Product Information
Data Sheet
LLJR-CATE-101/105 Connection Details
Tutorial Video
Live-Link Full-Line Summary
Live-Link Series Comparison Chart

Live-Link Jr. "10X" Main Components
Units with opticalCONĀ® DUO Connectors Units with ST Optical Connectors
Unit: Camera End
Connector: one opticalCON DUO
Order Code: LLJR-CA-101

Live-Link Jr. Camera End Unit ENG/SNG Field Camera Interface Solution


Unit: Camera End
Connectors: two ST Optical
Order Code: LLJR-CA-105

Live-Link Jr. Camera End Unit ENG/SNG Field Camera Interface Solution


Unit: Truck End
Connectors: two ST Optical
Order Code: LLJR-TE-101

Live-Link Jr. Truck End Unit ENG/SNG Field Camera Interface Solution

Live-Link Jr. Truck End Unit ENG/SNG Field Camera Interface Solution

Typical Configurations:
LLJR-CA-101 with LLJR-TE-101
LLJR-CA-105 with LLJR-TE-101

Live-Link Jr. "10X" Accessories
Live-Link Jr. Hybrid Fiber/Copper Power Supply Installation Kit
Order Code: HFCPSK-01
For use with Live-Link Jr. applications where camera end powering using hybrid fiber/copper cable assemblies is desired. Includes pre-wired opticalCON DUO bulkhead connector, LC-ST fiber-optic jumpers, power interface board, and 48 V, 2.5 A output/universal input (100-240 V, 50/60 Hz) power supply. Live-Link Jr. Hybrid Fiber/Copper Power Supply Installation Kit

Replacement 12 Vdc, 5 A Power Supply
Order Code: PS-DC-01
Universal input, 100-240 V, 50/60 Hz; 12 Vdc, 5 amps (60 watts) output power supply. IEC C14 mains inlet; 4-pin female XLR DC output. One included with each Live-Link Jr. Camera End unit. This power supply is for spare or replacement only!

PS-DC-01 Power Supply